Eryone Silk PLA
C3D was given the opportunity to test the line of Eryone Silk Filament. It is one of the best silk filaments I have tested. Eryone filament is made with material purchased fromt the USA and then shipped to China to be manufactured in to their filament. For full disclosure, I was given the filament at no charge in exchange for our review. I will still be giving my honest review and I will be providing not only my test prints but test prints from other members of C3D Media.
Looks take a look at the filament roll itself.
- 60 mm wide
- 197 mm tall
- 74.75 mm inner spool diameter (the area that hangs on the spool holder)
- 3 filament holder holes on each side that are spaced apart.
- Diameter: 1.75
- Tolerance: +/- 0.02
- Temp Range: 190c-220c
- Net weight: 1kg
Testing the Tolerances
Here are the specs from the Eryone above. These are almost all the stock specs we see on most filament manufacturers. I ran test prints on my Artillery Sidewinder X1 and my CR-10s. First thing I did was run a temp tower test. I found that the filament has a great temperature tolerance from 205c-220c, and anything 200c – 195c didn’t bond that well to the previous laters. Running at 215c, I ran a retraction test to see if I needed to change these settings. Thankfully, I did not have to change any retraction settings. I did find that the average tolerance is at 1.75mm. Lowest was at 1.73 and the highest was around 1.77mm. Now, let’s move to the test prints.
C3D Test Prints
I can honestly say that I really like this filament. The Gold will show a little more retractions lines than the other silks, but this can be managed by adjusting your coasting and wipe settings. The Silver has a nice low shine to it and doesn’t show the retraction lines as much as the Gold does. The Copper is by far my favorite. It has a great shine to it and really gives your prints a whole new look.
Where Can You Buy Eryone Silk?
You can purchase these filaments on Amazon in the US, Italy, Canada, France, Spain, Germany, and the UK. See below for our C3D discount codes. You can use promo “EryoneC3D” to save 15% off your order on Amazon in the US, UK, France, Canada, and Italy.
You can purchase the Artillery Sidewinder X1 HERE