C3D News

Calibrating Your New 3D Printer

Calibrating Your New 3D Printer

Calibrating Your New 3D Printer So you got a new 3D printer. The possibilities can seem almost endless. UNLESS your printer is not correctly calibrated, it can frustrate you to the point of quitting the hobby you just started. Welcome to calibrating your new 3D...

Fysetc MK3 3D Printer Review

Fysetc MK3 3D Printer Review

Well when one of the most popular 3D printers also happens to be open source you can guarantee there will be a company that will clone it. That’s exactly what has happened here with the MK3 from Fysetc based off of the Prusa MK3. Fysetc sent me the parts to build an...

Tevo Flash 3D Printer Review

Tevo Flash 3D Printer Review

As an owner of a Tevo Tornado and Michelangelo I was excited to see what the Tevo Flash could do as my previous Tevo's print very well. My Tevo Flash came 98% assembled and required very minor assembly to get it up and running. The Flash has a 235mm x 235mm x 265mm...

Alfawise U20 Final Review

Alfawise U20 Final Review

Check out the video below for our final review of the Alfawise U20 3d printer. If you are interested in picking one of these up please consider using the affiliate link below. All purchases made through our affiliate links directly support C3D Media Group.

Alfawise U20 Initial Thoughts

Alfawise U20 Initial Thoughts

Check out our initial thoughts on the Alfawise U20 3d printer. If you are interested in picking one of these up please use the affiliate link below to support C3D Media Group. https://goo.gl/G4AFJr

East 3d Sapphire Corexy First Impressions

East 3d Sapphire Corexy First Impressions

I was very interested to see what East 3D had to offer with there new corexy 3d printer the Sapphire. East 3D had previously released the Gecko with mixed feedback from the community. The Sapphire is the newcomer, and has followed a more traditional approach to a...